Broken or cracked tiles can cause significant damage to a slate roof if left unchecked. In order to keep the slate roof safe and secure from weather-related damage, it is important to replace broken tiles as soon as possible. Replacing broken tiles on a slate roof requires some skill and knowledge in order to get the job done properly. The first step when replacing broken tiles on a slate roof is to remove the damaged tile without damaging any of its surrounding tiles. To do this, you will need to use a chisel and hammer, gently tapping around the edges of the tile until it can be pried off without damaging any other components of the roof. Once it has been removed, clean up any debris in order to create a smooth surface for installation of your new tile. Next, you’ll need to measure the space for your new tile, making sure that it fits properly within the existing tile pattern. Once you have determined the size needed for your replacement tile, cut it so that it fits perfectly into place. After you have cut your new tile, lay it in place making sure all sides are even with their adjacent tiles and that there is no gap between them. Once your new tile is in place, you’ll need to secure it into place with nails or screws depending on what type of material was used when constructing your roof. Make sure that each nail or screw goes through both pieces of material firmly in order to keep your new tile securely in place for years to come. Finally, apply mortar onto all sides of the newly installed tile and let dry before testing out its strength by walking on top of it lightly. Replacing broken or cracked tiles on a slate roof may seem like an intimidating task, so to take all the worry out and to receive a guarantee of work undertaken for your repairs why not call the local Roofers in Kent, they deal with all repairs in Tunbridge Wells, Tonbridge, Wadhurst and the surrounding areas.